NHTR-6000
特点：
█恒扭矩变频控制电机驱动，负载能力强，低速稳定性能好；
█聚氨酯滚轮设计，增大滚轮与工件间的摩擦力，耐温，耐磨，不打滑；
█主动、从动架分离式架构，能够适应任意长度的工件；
█滚轮相对位置有级可调，可适应任意长度的工件；
█调整滚轮位置时无需无需使用任何工具，直接将滚轮对称放入相应沟槽即可，操作方便、快捷，省时省力；
█采用脚踏式开关控制设备启、停，并可以选配NHFC-10型控速脚踏开关同时控制设备的转速和启动/停止，实现一键式操作，操作方便、简易;
█整机采用焊接结构件设计，刚性好，牢固、可靠；安装、移动方便。
Characteristics:
●Since the constant torch,frequency control motor, making the load capacity much bigger, low-speed stability much better.
●Polyurethane wheel design increases the friction between wheel and work piece, standing the high temperature, fiction better and do not easy to skid.
●Separation structure is suitable for any length work piece.
●The position of the wheel can be adjustable to fit the larger range of work piece.
●Do not need any tool to remove the position of wheel, just put the wheel symmetrically into the relative groove, so easy and simple to operate and even save your value time and labor.
●Adopting the foot pedal , which could control the on/off of the turning roll. You can also choose the NHFC-10 speed foot pedal, which could control the on/off, but also the rotation speed. Realizing the one key regulation, easy operation.
●The whole machine adopts the welding design structure, holding the advantage of compact structure and high Rigid, convenient to install and remove, very suitable for the different workiing place.
技术参数Specifications:
| 型号Model | NHTR-6000 |
| 输入功率/Input Power | 1Phase AC220V 50/60Hz |
| 旋转能力/Turning Capacity | 6000㎏ |
| 承载能力/Load Capacity | 6000㎏ |
| **大工作速度?max Speed | 1500㎜/min |
| 适用工件直径范围/Diameter Range | Ф160-4000㎜ |
| 驱动电机/Drive Motor | AC380V 370V |
| 滚轮型号/Roller Type | NH, 100㎜(W)*300㎜(Ф) |
| 外形尺寸/Dimension | 1800*700*350㎜ |
